Heating oil S
DIN 51603-3
Test parameter | Method |
|---|---|
Density (15 °C) | DIN EN ISO 12185 |
Flash point P.M. | DIN EN ISO 2719 |
Kinematic viscosity | ASTM D 7042 |
Pourpoint | DIN ISO 3016 |
Coke residue | DIN EN ISO 10370 |
Sulfur content | DIN EN ISO 14596 |
Water content | DIN EN ISO 12937 |
Sediment content | DIN EN ISO 3735 |
Calorific value | DIN 51900-1 / -2 |
Ash (oxide ash) | DIN EN ISO 6245 |
Further possible test parameters:
Additional parameter | Method |
|---|---|
C/H/N Elementary analysis | ASTM D 5291 |
Element screening | DIN 51399-2 |
Vanadium content | DIN 51399-2 |
GCxGC-TOF MS analytics | ASG 2221 |
Oxygen content | DIN 51732 mod. |
Nitrogen content | DIN 51444 |
Asphaltene content | DIN 51595 |
Cetane number | IP 498 |
Analysis using GCxGC
With the analysis by GCxGC (ASG 2253 or ASG 2502) further methods are available. Additional information can be found in the section "Special analytics" or on request.
Contact
Dr. Karolina Kazmierczak
Laboratory Manager
Analysis order
Download your analysis order for heating oil S DIN 51603-3
[ PDF 0.5 MB ] 
